- Description
- Technical information
- Conditions
- Manual
- Environmental protection
- Operational safety
- Reviews (0)
Suitability
Parquet, wooden floors, wooden stairs, etc. Not suitable for varnishing diamond pine or chemically treated wood species, such as smoked oak.
Characteristics
· 1-component, can also be used for primer coating.
· The product belongs to the M1 group of emission classifications for building materials.
· The product has been granted the right to use the Key Flag ID.
· Domestic quality product
Technical information
Density approx. 1 g/ml
Kuiva-ainepitoisuus n. 42 p-%
Kiiltoaste Puolikiiltävä
Varastointi Varastoitava viileässä. Huonosti suljettu tai vajaa astia ei kestä varastointia. Säilyy 12kk.
Kemikaalinkestävyys DIN68861 Part 1/B
Kulutuksenkesto EN ISO 7784-2 (taber-testi): 17mg (1000r/1000g/CS17)
Riittoisuus huopa-, mohair-, flotexlasta: 8-12 m²/l
teräslasta: 15-25 m²/l
Kuivumisaika hiontakuiva 30min, päällelakattavissa 2-4h, kevyt rasitus 24h, täysi rasitus n. 2 viikkoa.
Kuivumiseen vaikuttavat kalvonpaksuus, lämpötila, ilman suhteellinen kosteus ja ilmanvaihto.
Käyttöolosuhteet Lämpötilan on oltava yli + 18⁰C
Transport temperature Protect from freezing.
Työvälineet Tela, lasta, pensseli.
Ohentaminen Tarvittaessa lakkaa voi ohentaa vedellä 5-10%
Työvälineiden pesu Vesi ja saippua.
Pakkauskoot 5L, 10L
EU VOC raja-arvo (cat. A/i) 130 g/l (2010). Käyttövalmiin tuotteen VOC<130 g/l
Conditions
The surface to be varnished must be dry and clean. During varnishing, the temperature of the air, the treated surface and the varnish must be above +18-25oC and the relative humidity of the air must be below 70%. The moisture content of the wood must be below 20%.
Manual
The wooden surface must be dry, well sanded and carefully cleaned of dust and other impurities.
Untreated and sanded floors:
Prime the floor with approx. 10% thinned semi-gloss LLU Parquet varnish. Intermediate sanding, if necessary, with sandpaper or mesh after the first primer. Surface varnish the floor with semi-glossy LLU Parquet varnish 2–3 times in the direction of the wood pattern. If necessary, thin the varnish by 5% in surface varnishing.
Factory-varnished parquet floors or floors previously varnished after installation (maintenance varnishing):
Clean the floor thoroughly. Perform a light intermediate sanding with sandpaper. Remove the sanding dust by vacuuming and using a damp clean cloth. Varnish with semi-gloss LLU Parquet Varnish once with a stainless steel spatula and 1–2 times with a felt spatula.
The final hardness of the varnished surface will be reached within approx. 2 weeks.
The information on the product card is based on laboratory testing and practical results. All test results are indicative. Since we cannot influence the operating conditions, working methods, methods, we are only responsible for the quality of our products and guarantee that it complies with high quality standards. We are not responsible for damages caused by improper use of the product contrary to the instructions for use or purpose.
Environmental protection
The product must not be released into drains, waterways or soil. Unused fresh varnish is delivered to a hazardous waste point for disposal. Empty, dry lacquer containers can be delivered for recycling. Dried varnish is landfill waste.
Operational safety
Use care and avoid unnecessary exposure. The use of protective gloves and eye protection is recommended. A separate safety data sheet is available for the product.
Flammability Not flammable.
Transport Warm transport. Not VAK-classified.
Be the first to review “LLU Parkettilakka puolikiiltävä”
You must be logged in to post a review.
Related products
Water-based, ecological, tintable liquid for coloring interior wooden surfaces.
Food-grade 100% paraffin oil that protects against moisture and dirt for boards and other wooden surfaces.
Water-based, fast-drying, well-filling, hard-surfaced and extremely wear-resistant acrylate-based surface varnish for public spaces.
Water-based, acrylate varnish for indoor use. Can be tinted to transparent tones.
Water-based, acrylate-based lacquer-like protective agent for wood surfaces. Can be tinted to transparent tones.
Water-based, fast-drying, non-yellowing and well-leveling semi-matte floor paint for dry interiors.
LLU Sauna wax Water-based, natural wax-containing protective agent for wooden surfaces in dry and damp interiors. The product forms a breathable surface that repels water and dirt. Can be tinted to audible tones.
Water-based, fast-drying, well-filling and very wear-resistant acrylate-based parquet varnish for public and residential spaces.
Reviews
There are no reviews yet.